SE2102 - WARNER ELECTRIC-SE2102-DC DRIVE 2HP115/230VAC 90/180VDC 10ADC Simple Type: TBD
- Part Number:
- SE2102
- Model Number:
- SE2102
- Make:
- WARNER ELECTRIC
- Lead Time:
- Available
- Qty In Stock:
- Available
WARNER ELECTRIC-SE2102-DC DRIVE 2HP115/230VAC 90/180VDC 10ADC Simple Type: TBD
DC DRIVE 2HP115/230VAC 90/180VDC 10ADC
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- designed to control shunt wound
- motors from 1/4 to 5 HP.
- Non-regenerative, DC drives are
- or permanent magnet field DC
- SE2000 series
Specifications
- 115 VAC: 1/4–1 HP
- 115 VAC: Supply
- 230 VAC: 1/2–5 HP in two models
- AC Line: Frequency
- AC Line: Input
- Acceleration: 0.3 to 30 seconds
- Altitude: To 3300 ft. (1000m)
- Armature Voltage: ±2%
- Chassis Model: 55°C
- Current Range: (Torque) 15–150%
- Deceleration: 0.3 to 30 seconds
- Duty: Continuous
- Enclosed Model: 40°C
- IR Compensation: Improves load regulation in
- Line Protection: Circuit Breaker (except Power
- Max. Load Capacity: 150% for 1 min.
- Maximum Speed: 70–105% of motor base speed
- Minimum Speed: 0–30% of motor base speed
- Preset Jog: 0–100% of motor base speed
- Relative Humidity: 95% non condensing
- Service Factor: 1.0
- Speed Reference Signal Voltage: 0–10 VDC
- Speed Regulation: (As % of motor
- Tachometer Feedback: ±0.5% (depending on tach
- Torque Slope: Increasing torque to decreasing
Applications
- None Available
Aliases
- None Available
